Home Who We Are Testimonials Contact Us
Home
Tub, Shower & Spa Repair
Bathtub Refinishing
Countertop & Sink Repair
Tub & Shower Conversions
Multi-Piece & Remodel Showers
Handicap, ADA & Special Care Showers
Walk-In Tubs
Tub & Shower Accessories
Custom Fiberglass Projects & Special Orders
Roll-A-Ramp
FRP Truck Box Repair
Municipal & Commercial Projects
Who We Are
Testimonials
Contact Us

Boise, Burley, Caldwell, McCall, Twin Falls, Idaho Bathroom & Special Needs Accessories | Treasure Valley Fiberglass Repair, LLC

Grab Bars
All products are customizable!

Seachrome offers a complete line of heavy-duty stainless steel and solid brass grab bars for use where maximum safety, durability, and reliability are mandatory. Bars are available in a wide variety of flange styles, tube diameters, sizes, configurations, and surface finishes. Seachrome grab bars are 100% American made and comply with all ADA requirements when properly installed.

In addition to the standard models listed here, Seachrome specializes in custom sizes and configurations. Please call or email us for technical assistance and competitive price quotes.

Tubing:   Wall Flanges:
Bars are manufactured using either Type 304 (18-8) 18 ga. (.049") stainless steel or 260 alloy 18 ga. (.049") solid brass tubing. Grab bars are available in either 1.25” (32mm) “Q” Series or 1.50” (38mm) “H” Series diameters.   Mounting flanges are constructed of Type 304 stainless steel and heliarc welded to the bar to form a single structural unit. Flanges are available in exposed screw and concealed screw styles with a selection of decorative flange covers. You will find our most popular flange styles below. Many other “flange-less” and other custom mountings are available. Please call the factory for additional information.

Flange Styles:

Decorative Flange Covers:

Exposed Screw Flange  Type "ER" Exposed Screw Flange Type "EW"


Plain


CB2 Rope


CB3 Ridge


CB4 Step


CB5 Band

Concealed Screw Flange Type "CR" Concealed Screw Flange Type "CB"

Wall Clearance:

On straight bars, the standard clearance between the finished wall surface and the inner bar edge is 1.5" (38mm.) Other wall clearances are available on request.

Finishes:

In addition to our standard brushed satin finish, all stainless steel bars are available in polished, powder coated, or PVD finishes. In addition, stainless bars can be provided with a slip-resistant peened gripping surface with either satin or polished ends. Polished solid brass bars are also available.

  • GS - Satin #304 Stainless Steel
  • GX - Polished #304 Stainless Steel
  • GY - Peened w/satin ends, #304 Stainless Steel
  • GZ - Peened w/polished ends, #304 Stainless Steel
  • GB - Polished #260 Solid Brass
  • GP - Powder Coated #304 Stainless Steel
  • GD - PVD Finished #304 Stainless Steel in the following finishes:
    • (PN) - Polish Nickel
    • (SB) - Satin Brass
    • (SN) - Satin Nickel

Configuration and Sizes:

Some of our most popular standard configurations are shown below. But Seachrome designs and manufactures grab bars in an almost limitless variety of custom sizes and configurations. If you don’t see it here, please call the factory for additional information.

"S" - Straight Bar "M" - Straight Bar
w/Center Post
"T" - Tub & Shower Bar (Reversible)
"U" - U-Shaped Shower Bar "V" - Vertical Angle Bar (Right or Left)
Left Hand Shown

"B" - Boomerang Bar
"D" - Drinking Fountain Bar   "W" - Wall to Floor Bar

Load Bearing and Installation:

When properly installed, all Seachrome 1½" clearance, wall-mounted, straight bars have been designed and manufactured to support loads exceeding the downward pull requirements for Federal specifications FHA, VA, HUD, hospital codes, and private construction. The actual "in use" load bearing capacity of any grab bar, however, will be limited by the strength of its mounting surface and installation hardware. Seachrome recommends that grab bars be installed using 2" minimum thickness "in wall" solid wood backing material with #10 x 2" stainless steel, phillips-head, sheet metal screws, or using a wall embedded, minimum 12 ga. (2.8mm) steel anchor plate with #10 x 24 stainless steel machine screws. When mounting on toilet partitions, Seachrome recommends the use of 3" (76mm) dia., 16 Ga. (1.6mm), stainless steel, "through wall" anchor disks. Please contact the factory for further mounting recommendations.
Under no circumstances should any grab bar be mounted to drywall, sheetrock, plaster, fiberglass, acrylic or other similar "hollow" wall surfaces without appropriate wood or steel backing material.

How To Order:

Seachrome’s part-numbering system allows you to easily specify your unique combination of finish, configuration, size, bar diameter, and flange style.

For example, to order a satin finish stainless steel, 24 x 36 tub and shower bar with concealed screw flanges and the rope style decorative flange covers, our item designation is GST-240360-HCR2. This is derived as follows:

Finish Series
Configuration
Dimension
Bar Diameter
Flange Style
GS
T
240360
H
CR2

For superior fiberglass repair, call Treasure Valley Fiberglass Repair, LLC today! Call us at (208) 602-1059 or fax us at (208) 939-1595 or you can fill out our online information request form.

Home | Tub, Shower & Spa Repair | Bathtub Refinishing | Countertop & Sink Repair | Tub & Shower Conversions | Multi-Piece & Remodel Showers | Handicao, ADA & Special Care Showers | Walk-In Tubs | Tub & Shower Accessories | Custom Fiberglass Projects & Special Orders | PWC, ATV & Snowmobile Fiberglass Repair | FRP Truck Box Repair | Municipal & Commercial Projects | Who We Are | Testimonials | Contact Us

Copyright 2007 - 2009 All Rights Reserved - Web Design and Hosting by iBizwebsite